Canon 600D Underwater Housing 40m

Waterproof case in a variety of shapes, sizes and costs. There are Diving Camera shell for old 35mm cameras to pro digital DSLR cameras. Basically though, a dslr underwater housing is a plastic enclosure for your camera to protect it from water and presure.

The underwater housing for Canon 600D is made of transparent polycarbonate , To prevent condensation on the EOS camera, the water-tight case has been fitted with double anti-condensation glass. The camera produces too much heat to be able to prevent condensation completely. But you can fix this by placing a sachet of silica gel in the case. this will absorb moisture and prevent all kinds of problems.

Features:

• waterproof, dustproof
• fit for Canon 600D T3i with 18-55mm lens
• transpartent design
• protestion for Camera
• Maximum water resistant 40 meters/ the depth up to 40 meters
• Exquisite, easy to use
• with high quality waterproof and low price
• good tightness
• high mechanical strength
• 40M waterproof 1M shockproof

   

  Diving Camera shell Benefit:

• whether rain or snow, you can have unrestricted use of your camera
• good tightness, high mechanical strength, to protect your camera
• dustproof, anti-staining fingerprint, easy cleaning
• Maximum water resistant 40 meters
• ransparent hard plastic material and waterproof, dustproof

   

  Diving Camera shell Underwater operation:

  Diving Camera shell is very simple to use. Just place the camera in the case and seal the lid. An O-ring is used to make sure this is shut properly. The buttons and switches on the underwater camera housing are large and brightly colored. Which means that it is easy to see them underwater. The camera can also be operated perfectly well if you are wearing diving gloves.

   

  Diving Camera shell Diffuser plate:

  Underwater housing for Canon 600D with a diffuser plate. This component for the flash light helps to prevent a snow effect underwater when the flash light is reflected on the microscopic small particles in the water. Most of underwater cases have a diffuser plate for the flash light that distributes the light from the flash lamp, so that underwater photos taken with a flash are much better.

   

  Underwater housing Use:

  Installing the camera case requires full attention, it is important to work on a clean sub-soil to reduce the chance of dirt getting onto the o-ring to the minimum. Also important is to have everything at hand. So u willnot run risks of forget anything. If you donot follow these rules you are bound to make mistakes. Make sure you donot get distracted.

  O-ring:

  The underwater housing is closed with a O-ring. Every single time when underwater housing has been opened, the o-ring has to be cleaned and greased if necessary. While doing so it is highly important to seek that no grain of sand or hair got onto the o-ring. One single grain of sand on the O-ring could mean the end of a valuable compact camera.

  Camera control:

  The camera can be placed in the waterproof case with great ease. Once the camera is positioned inside the Diving Camera shell, the latter is closed by means of a lock on the left side. Before actually taking the underwater , pls always check one last time if the O-ring is correctly placed. And as a final check , you can put it in a bowl of water

   

  Diving Camera shell Precautionary Measure:

  1. use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C water may not use, because it will damage waterproof shell. 
  2. Need longer cleaning time if ever used waterproof case. Should put into water for several hours. 
  3. Pls sure whole case into water, include Safety lock device. 
  4. In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water. 
  5. vestigital seawater will lead to corrosion metal parts equipment, it will affect button, two hinges and safety lock device

  6. Use soft and clean fabric to clean equipment inside.

  Before Use Test:

  
  Check whether good of performance first. Also check whether have sand and dust inside of case.Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera. 
  Make sure there have no water inside. Then put your camera into waterproof case.

   

  Package Include:

• 1 * Hand strap
• 1 * arm strap
• 1 * O-ring
• 1 * diffuser plate
• 1 * user manual

Let our marketing agent help you to find out how much for the shipping cost

All prices are subject to change without notice. Please contact our marketing agency. They will also tell you if there is any discount for this product